Monday, April 14, 2014

Basic Electrical PART 4

MCQ – Basic Electrical
1. Cells are connected in series in order to increase the
§  current capacity
§  life of the cells
§  voltage rating
§  terminal voltage
2. Cells are connected in parallel in order to increase
§  life of the cells
§  efficiency
§  current capacity
§  voltage rating
3. When two cells are connected in parallel , it should ensure that have
§  identical internal resistances
§  equal emfs
§  same ampere hour capacity
4.The capacity of a battery is expressed in
§  amperes
§  amperes-hour
§  watts
§  watt-hour
5. A series resonant circuit implies
§  zero pf and maximum current
§  unity pf and maximum current
§  unity pf and minimum current
§  zero pf and minimum current
6. which one is classified as integrating instrument?
§  D’arsonval galvanometer
§  Ampere-hour meter
§  ohm-meter
§  ammeter
7. Which of the following types of instrument is an integrating instrument?
§  power factor meter
§  energy meter
§  watt meter
§   frequency meter
8. Voltmeter should be of very high resistance so that
§  its range is high
§  its accuracy is high
§  it may draw current minimum possible
§  its sensitivity is high
9. If a voltmeter is connected like a ammeter in series with a load
§  the measurement reading will be too high
§  almost no current will flow in the circuit
§  the meter will burn out
§  an inadmissably high current will flow
10. A multirange instrument (ammeter or voltmeter) has
§  multiple shunt or series  resistances inside the meter
§  variable coil turns
§  multi -coil arrangement
§  any of the above



No comments:

Post a Comment